特点
5mmx5mm SMD LED, 1.5mm THICKNESS.
(5mmx5mm SMD 发光二极管,总高1.5mm)
VARIOUS COLORS AVAILABLE.(有各种颜色可供选择)
WIDE SIDE VIEWING ANGLE.(宽角度发光)
LOWPOWER CONSUMPTION. (低功率消耗)
Package Dimensions(封装尺寸)
1. All dimensions are in millimeters (inches). 所有单位是毫米(英寸)
2. Tolerance is ± 0.25mm (.010”) unless otherwise noted. 允许误差为正负0.25mm,除非另行通知
3. Specifications are subject to change without notice.规格可能随时有变化,不另行通知。
4. This data-sheet only valid for six months.本数据有效期为六个月通量特征
1
Absolute Maximum Ratings at TA=25oC(在25oC环境下之绝对最大额定值) Maximum Rating(最大Parameter(参数) 规定值) Power Dissipation(消耗功率) Peak Forward Current(脉冲电流) (1/10 Duty Cycle, 0.1ms Pulse width Continuous Forward Current(峰值电流) Derating Linear From 50℃(电流比例关系) Operation Temperature Range(工作温度) Storage Temperature Range(储存温度) Lead Soldering Temperature [4mm (.157”) From Body] (焊接温度) 200 150 150 0.4 -40℃ to +80℃ -40℃ to +80℃ 260℃ for 5 Seconds(260度下不超过5秒) Unit(单位) mW mA mA mA /℃ Electrical / Optical Characteristics at TA=25℃ Parameter(参数) Luminous Flux(光通量) Luminous Intensity(光强) Chromaticity Coordinate(R)色温 Symbol标志 Min. 15 4000 2700 3.0 - Typ. -- -- 5000 120 3.3 - Max. 17 5000 10000 3.6 5 Unit单位 最小值 中间值 最大值 Test Condition测试条件 IF=60mA Note 1.4 IF=60mA Note 1.4 IF=60mA Note4 Note 2 IF=60mA VR=5V IV IV CCT lm mcd K deg V μA Viewing Angle(发光角度) 2θ1/2 Forward Voltage(正向电压) Reverse Current(反向电流) VF IR Note:1.Luminous intensity is measured with a light sensor and filter combination that approximates
the CIE (Commission International De L’Eclairage) eye-response curve.
2.1/2 is the off-axis angle at which the luminous intensity is half the axial luminous and
intensity.
3.The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 4.The IV guarantee should be added ±15%.
2
2 450 6000500050正向电流(mA)相对光强(mcd)403020100400030002000100002.53正向电压(V)3.54020406080100正向电流(mA)相对光谱功率分布 5000-10000K(CCT) 3700-5000k(CCT) 2600-3700k(CCT)100802420相对辐射功率(%)6040200400光通量(Lm)1612840020406080100500550600650700750波长(nm)正向电流(mA)
3
4
白光色度区域限定坐标
区域 X Y 0.283 0.284 0.295 0.297 0.298 0.288 0.287 0.276 0.292 0.306 0.295 0.297 0.283 0.284 0.279 0.291 区域 X Y 0.314 0.355 0.316 0.332 0.306 0.322 0.301 0.342 0.317 0.319 0.329 0.330 0.329 0.318 0.318 0.308 WK WA WF WP WM 0.295 0.297 0.308 0.311 0.310 0.300 0.298 0.288 WD 0.329 0.345 0.329 0.330 0.317 0.319 0.316 0.332 WB 0.306 0.322 0.308 0.311 0.295 0.297 0.292 0.306 WG 0.329 0.369 0.329 0.345 0.316 0.332 0.314 0.355 WE 0.301 0.342 0.306 0.322 0.292 0.306 0.287 0.321 WJ 0.329 0.330 0.329 0.345 0.346 0.359 0.344 0.342 WN 0.308 0.311 0.317 0.319 0.318 0.308 0.310 0.300 WH 0.348 0.384 0.346 0.359 0.329 0.345 0.329 0.369 WC 0.316 0.332 0.317 0.319 0.308 0.311 0.306 0.322
5
暖白色度区域限定坐标
区域 X 0.3371 0.3451 0.344 0.3366 0.3376 0.3463 0.3451 0.3371 0.3463 0.3551 0.3533 0.3451 0.3451 0.3533 0.3515 0.344 0.3512 0.3529 0.3615 0.359 0.3529 0.3548 0.3641 0.3615 0.3615 0.3641 0.3736 0.3702 0.359 0.3615 0.3702 0.367 Y 0.349 0.3554 0.3428 0.3369 0.3616 0.3687 0.3554 0.349 0.3687 0.376 0.362 0.3554 0.3554 0.362 0.3487 0.3428 0.3465 0.3597 0.3659 0.3921 0.3597 0.3736 0.3804 0.3659 0.3659 0.3804 0.3874 0.3722 0.3521 0.3659 0.3722 0.3578 区域 X 0.367 0.3702 0.3825 0.3783 0.3702 0.3736 0.3869 0.3825 0.3825 0.3869 0.4006 0.395 0.3783 0.3825 0.395 0.3898 0.3889 0.3941 0.408 0.4017 0.3941 0.3996 0.4146 0.408 0.408 0.4146 0.4299 0.4221 0.4017 0.408 0.4221 0.4147 Y 0.3587 0.3722 0.3798 0.3646 0.3722 0.3874 0.3958 0.3798 0.3798 0.3958 0.4044 0.3875 0.3646 0.3798 0.3875 0.3716 0.369 0.3848 0.3916 0.3751 0.3848 0.4015 0.4089 0.3616 0.3916 0.4089 0.4165 0.3984 0.3751 0.3916 0.3984 0.3814 区域 X 0.4147 0.4221 0.4342 0.4259 0.4221 0.4299 0.443 0.4342 0.4342 0.443 0.4562 0.4465 0.4259 0.4342 0.4465 0.4373 0.4373 0.4465 0.4582 0.4483 0.4465 0.4562 0.4687 0.4582 0.4582 0.4687 0.4813 0.47 0.4483 0.4582 0.47 0.4593 Y 0.3814 0.3984 0.4028 0.3853 0.3984 0.4165 0.4212 0.4028 0.4028 0.4212 0.426 0.4071 0.3853 0.4028 0.4071 0.3893 0.3893 0.4071 0.4099 0.3919 0.4071 0.426 0.4289 0.4099 0.4099 0.4289 0.4319 0.4126 0.3919 0.4099 0.4126 0.3944 3A 3B 3C 3D 4A 4B 4C 4D
5A 5B 5C 5D 6A 6B 6C 6D 7A 7B 7C 7D 8A 8B 8C 8D
6
Reflow Soldering Instructions (回流焊说明)
Number of reflow process shall be less than 2 times and cooling
process to normal temperature is required between first and Second soldering process.
(本产品最多只可回焊两次,且在首次回焊后须冷却至室温之后方可进行第二次回焊.) 1>Lead Solder(有铅回焊)
8 sex max 230℃ 4℃/sec max re
2>Lead-Free Solder(无铅回焊)
8 sex max
TemperatuTemperatu140~160℃ 4℃/sec max Over 120 sec Time 260℃ 4℃/sec max 180~200℃ 4℃/sec max Over 120 sec Time
7
Recommended Soldering Patter (n推荐焊盘式样) 8 因篇幅问题不能全部显示,请点此查看更多更全内容