OfficialUKRepresentativeUnitAMerlinCentre,GatehouseClose,Aylesbury,HP198DP,ENGLANDTel.:+44(0)1296-469770sales@displaze.comFax.:+44(0)1296-469779www.displaze.comPleaseverifythisisthelatestinformation.E&OE 2. History of Specification Revision Date Rev. Page Contents 4,5 Revised CN2 pin assignment : 2 2002.06.19 Pin-1: GND; Pin-4: H.V Æ Pin-1:H.V; Pin-4:GND 8 Revised 6.3 Electrical Characteristics of Backlight : Starting Voltage: Min.(900); Lamp Voltage: Typ.(440) ÆStarting Voltage: Max.850; Lamp Voltage: Typ.(443) 20 Revised 12.2 Lot No. Definition: Year Month Week Æ Year Month Day Display Corporation Module No. : MC75T01B Date: 2002.07.17 Ver.: 2 Page: 2 This specification is the property of Arima Display Corporation , any copy or reproduction without permission is prohibited. 3. LCD Module 3.1 Main Data No. Item (1) Module size (2) Viewing area (3) Dot Number (4) Dot Size (5) Dot pitch (6) LCD type Contents 197.0(W) x 145.0(H) x 8.0(D) (158.0) (W) x (118.0) (H) 640 x 3 (R.G.B) (W) x 480 (H) 0.064(W) x 0.222(H) 0.079(W) x 0.237(H) •Color-STN (Negative type) • with glare upper polarizer and transmissive rear polarizer . • 0.7mm thickness glass (7) Contrast ratio (8) Duty (9) Viewing direction (10) Operating temperature (11) Storage temperature (12) Backlight (13) Power Supply Voltage (14) Weight (30) 1/484 6 o‘clock +0 ~ +50 -20 ~ +70 Cold Cathode Fluorescent Lamp (CCFL) x 1 3.3V , 36.6V (240) - - - °C °C pcs - g - Unit mm mm dots mm mm Display Corporation Module No. : MC75T01B Date: 2002.07.17 Ver.: 2 Page: 3 This specification is the property of Arima Display Corporation , any copy or reproduction without permission is prohibited. 3.2 Outline Dimension Display Corporation Module No. : MC75T01B Date: 2002.07.17 Ver.: 2 Page: 4 This specification is the property of Arima Display Corporation , any copy or reproduction without permission is prohibited. PIN-1 : H.V ; PIN-4 : GND Note 1 : All dimensional tolerance unless otherwise specified+/-0.5 Note 2 : Scale : NTS , Unit : mm CN1 : FPC Pitch 1.0mm Suitable Connector 52271-2090(MOLEX) CN2 : M63-M83-04 (MITSUMI) 3.3 Interface Pin Connection Pin No. 1 3 5 7 8 9 10 11 12 13 14 15 Signal FLM CL1 CL2 D0 D1 D2 D3 D4 D5 D6 D7 DISP CN1 FPC : Pitch 1.0mm /Suitable Connector : 52271-2090(MOLEX) Pin Function Scan start-up signal Input data latch signal Data shift clock Display data Display data Display data Display data Display data Display data Display data Display data Display control signal H:ON , L:OFF Logic supply voltage Logic supply voltage Power supply for LCD 2 VSS GND 4 VSS GND 6 VSS GND 16 VDD 17 VDD 19 VLCD 18 VSS GND 20 VSS GND CN2 : M63-M83-04 (MITSUMI) /Suitable connector : M61-M73-04(MITSUMI)
M60-04-30-114P(MITSUMI) M60-04-30-134P(MITSUMI) Pin No. 1 Signal H.V Pin Function Power supply voltage for CFL 2 N.C ------ 3 N.C ------ 4 Display Corporation Module No. : MC75T01B Date: 2002.07.17 Ver.: 2 Page: 5 GND CFL GND This specification is the property of Arima Display Corporation , any copy or reproduction without permission is prohibited. 4. Block Diagram CN1 FLM CL1 CL2 DISP D0~D7 Y1 Column Driving Circuit Y1920 Row Driving Circuit X1 COLOR LCD PANEL 640×RGB×480 DOTS X480 VDD VSS VLCD Power Supply Circuit CN2 H.V GND CFL Display Corporation Module No. : MC75T01B Date: 2002.07.17 Ver.: 2 Page: 6 This specification is the property of Arima Display Corporation , any copy or reproduction without permission is prohibited. 5. Maximum Ratings 5.1 Electrical Absolute Maximum Ratings. (VSS=0V) Item Symbol Min. Max. Unit Power supply for Logic VDD-VSS -0.3 7.0 V Power supply for LCD driver VLCD-VSS 0 42.0 V Input voltage (Note 1) VI VSS-0.3 VDD+0.3 V Note 1. FLM,M,CL1,CL2,DISP,D0~D7. Note 2. Ta=25°C Note 3. Please be sure users are grounded when handling LCD module. VSS=0V 5.2 Environmental Absolute Maximum Ratings Storage Operating Remark Item MIN. MAX. MIN. MAX. Ambient Temperature -20°C 70°C 0°C 50°C Note1,2,3 Humidity Note 4 Note 4 No Condensation Vibration - - - - Depend on using design Shock - - - - Note 1. Ta at -20°C --------< 48 hours, at 70°C --------< 120 hours. Note 2. Background color changes slightly depending on ambient temperature. The phenomenon is reversible. Note 3. When LCM is operated at 0°C, the lift time of CFL will be reduced. Need to make sure of value of IL and characteristics of inverter. The response time at 0°C will be lower. Note 4. Ta<=50°C : 85%RH MAX. Ta> 50°C : Absolute humidity must be lower than the humidity of 85% RH at 50°C. Note 5. The module should be operated normally after the test is finished. Display Corporation Module No. : MC75T01B Date: 2002.07.17 Ver.: 2 Page: 7 This specification is the property of Arima Display Corporation , any copy or reproduction without permission is prohibited. 6. Electrical Characteristics 6.1 Electrical Characteristics of LCD Item Symbol Condition MIN. Typ. Max. Unit Power Supply for Logic VDD–VSS — 3.15 3.3 3.45 V Power Adjustment voltage Ta=5°C,φ0°C — — 40 V =Note (1) VLCD–VSS Ta=25°C,φ0°C 35.1 36.6 38.1 V Ta40°C,φ0°C 32 — — V Input Signal Voltage VIH “H” Level 0.8VDD — VDD V Note (2) VIL “L” Level 0 — 0.2VDD Power supply current IDD VDD3.3V — 10 30 mA (Logic)Note (3) Power supply current ILCD VDD3.3V — 12 50 mA (LCD driver) Note (3) Frame Freguency fFLM — — (100) (120) Hz Note (4) Note (1) In proportion as the VLCD decrease the brightness will increase. The value is specified as the voltage at which the optimum contrast is obtained. Note (2) FLM,CL1,CL2,DISP,D0~D7 Note (3) fFLM=(100)Hz,Ta=25°C,Display pattern is Black/White cross pattern as below. RGB RGB = = == == Note (4) Need to make sure that there is no flicker and ripple phenomenon when setting the Frame Frequency in your set. 6.3 Electrical Characteristics of Backlight Item Symbol Min. Typ. Max. Unit Remark Starting Voltage VS - - 850 Vrms Ta=25°C Lamp Voltage VL - (443) - Vrms Ta=25°C Frequency fL 40 60 80 KHz Ta25°C Lamp Current IL (2.5) (4.0) (4.5) mArms Ta=25°C Note (1) Starting voltage is higher when LCM at lower temperature. Note (2) Average life time of CFL will be decreased when LCM is operated at lower temperature Note (3) CFL life time : 10000 hours Min. at IL=4.0mA, Ta=25°C Display Corporation Module No. : MC75T01B Date: 2002.07.17 Ver.: 2 Page: 8 This specification is the property of Arima Display Corporation , any copy or reproduction without permission is prohibited. 7. Optical Characteristics 7.1 Optical Characteristics of LCD Ta= 25°C.(Backlight On) Item Symbol Condition Min. Typ. Max. Unit Remark X axle 60 - - Viewing Angle Range φ1, φ2 CR≥2 Deg. Note 1,2 Y axle 35 - - Contrast Ratio CR - (30) - - Note 3,4 φ=0° Rise tr θ=0°,φ=0° - (340) - ms Response Time Note 5 °°Fall tf θ=0,φ=0 - (100) - ms R G B W Color Tone (CIE Coordinate) x (0.44) (0.49) (0.54) - y (0.30) (0.35) (0.40) - x (0.28) (0.33) (0.38) - y (0.44) (0.49) (0.54) - °°θ=0,φ=0 x (0.15) (0.20) (0.25) - y (0.16) (0.21) (0.26) - x (0.27) (0.32) (0.37) - (0.30) (0.35) (0.40) - y Note 2. Definition of Viewing angle φ1 and φ21. Definition of θ and φ Note Y(θ=180°) φ2 φ1 Eye from (θ,φ1) CR Eye from ( θ,φ2) X‘ 2.0 φ1<0°<φ2 φ1 φ2 X θY(θ=0°) CR vs Viewing and φ Display Corporation Module No. : MC75T01B Date: 2002.07.17 Ver.: 2 Page: 9 This specification is the property of Arima Display Corporation , any copy or reproduction without permission is prohibited. Definition of Contrast Ratio “CR” Note 3. Brightness at selected dot (B1) CR= Brightness at non-selected dot (B2) B1 B1 B2 B2 Operation voltage Note 4. Definition of “CR”and “VOP” CR VOP Operation Voltage Note 5. Definition of optical response timeBrightness φ Sensor Back light Sensor : BM-7 Aperture : 1° Distance : 50 cm Non-selected state Brightness Selected state Non-selected state 100% 90% tr tf Fall time 10% Rise time Display Corporation Module No. : MC75T01B Date: 2002.07.17 Ver.: 2 Page: 10 This specification is the property of Arima Display Corporation , any copy or reproduction without permission is prohibited. 7.2 Optical Characteristics of Backlight Item Min, Typ. Max. Unit Remark Brightness - (100) - cd/m2 Note 1,2,3 Brightness Uniformity - - +/-30 % Note 2,3,4 Note 1. Measurement Condition: • Display data should be all “ON” (D0~D7=HIGH). • VLCD should be adjusted at the voltage where the peak contrast is obtained. • Start measuring after CCFL working 30 minutes. Note 2. Measurement of the following 5 points on the display. Y320 Y960 Y1600 dots Active area X=120 P1 P2 P3 X=240 P4 P5 X=360 === dots Note 3. The brightness shall be the average of P1~P5 point. Note 4. Definition of the brightness Uniformity Max brightness or Min brightness – Average brightness x100% Average brightness ( ) Display Corporation Module No. : MC75T01B Date: 2002.07.17 Ver.: 2 Page: 11 This specification is the property of Arima Display Corporation , any copy or reproduction without permission is prohibited. 8. Interface Timing Chart 8.1 Timing Chart CL1 (480+n)xT FLM D0~D7 X1 X2 X239 X240 Dummy data CL1 T CL2 X1 X2 B634 G637 R635 B637 G635 R638 B635 G638 R636 B638 G636 R639 B636 G639 R637 B639 D7 D6 D5 D4 D3 D2 D1 D0 R0 B2 G5 G0 R3 B5 B0 G3 R6 R1 B3 G6 G1 R4 B6 B1 G4 R7 R2 B4 G7 G2 R5 B7 Display Corporation Module No. : MC75T01B Date: 2002.07.17 Ver.: 2 Page: 12 This specification is the property of Arima Display Corporation , any copy or reproduction without permission is prohibited. 8.2. Electrical Characteristics (VDD=3.0~4.5V ,VLCD= +10.0~ +42.0V, Ta=+0°C~50°C) Item Symbol Min. Typ. Max. Unit Shift clock period tWCK 66 - - ns Shift clock “H” pulse wide tWCKH 23 - - ns Shift clock “L” pulse wide tWCKL 23 - - ns Data setup time tDS 10 - - ns Data hold time tDH 25 - - ns Latch pulse “H” pulse wide tWLPH 30 - - ns Shift clock rise to latch pulse rise time tLD 10 - - ns Shift clock fall to latch pulse fall time tSL 30 - - ns Latch pulse rise to shift ckock rise time tLS 30 - - ns Latch pulse fall to shift ckock fall time tLH 30 - - ns Enable setup time tTS 12 - - ns Input signal rise time tR - - 50 ns Input signal fall time tF - - 50 ns Output delay tD - - 44 ns FLM setup time tFS 30 - - ns FLM hold time tFH 50 - - ns tWLPH CL1 VIH VIL tLD tSL tLS tF tWCK tLH tWCKHtWCKL VIH VIL CL2 tR tDS VIH VIL tDH D0~D7 LAST DATA Horizontal retrace period VIH VIL TOP DATA CL1 tDS CL2 tDH 20 1 2 .. tFS FLM tFH Display Corporation Module No. : MC75T01B Date: 2002.07.17 Ver.: 2 Page: 13 This specification is the property of Arima Display Corporation , any copy or reproduction without permission is prohibited. 8.3 Power Supply and Signal Sequence Do not apply DC voltage to the LCD panel because that induces the electrochemical reaction and reduces its life time. Please follow the power supply ON/OFF sequence to prevent DC driving of LCD or latch-up of COMS LSI, as shown below. tDLD tDLD VDD tCH tCH 0.8XVDD0.8XVDD CL1 tDLCf tDLCr VLCD tDLCs tDLCs 0.8XVDD0.8XVDD 0.2XVDD0.2XVDD DISPOFF tLDH tLDH tDOf tDOr tVH POWER ON POWER OFF SYMBOL MIN. MAX. UNIT COMMENT tDLD 200 - ms tCH 0 - ms tLDH 20 - ms tDOr - 100 ns tDOf - 100 ns tDLCr 0 - ms tDLCf 0 - ms tDLCs 20 - ms tVH 200 - ms Note 1. Please keep the specified sequence because wrong sequence may cause permanent damage to the LCD panel. Note 2. Please use DISPOFF function to set display off. Switch by others different from the DISPOFF function may cause display deterioration. Display Corporation Module No. : MC75T01B Date: 2002.07.17 Ver.: 2 Page: 14 This specification is the property of Arima Display Corporation , any copy or reproduction without permission is prohibited. 8.4 Input Data Allocation Table D D D D D D D D D D D D D D D D D Data Signal 7 6 5 4 3 2 1 0 7 6 5 4 4 3 2 1 0 Y 1 1 1 1 1 9 9 9 9 9 1 2 3 4 5 6 7 8 9 10 11 12 ------- 1 1 1 1 2 X 6 7 8 9 0 1 R G B R G B R G B R G B G B R G B 2 R G B R G B R G B R G B G B R G B 3 R G B R G B R G B R G B G B R G B 4 R G B R G B R G B R G B G B R G B 5 R G B R G B R G B R G B G B R G B 6 R G B R G B R G B R G B G B R G B 7 R G B R G B R G B R G B G B R G B 8 R G B R G B R G B R G B G B R G B 9 R G B R G B R G B R G B G B R G B 10 R G B R G B R G B R G B G B R G B | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 478 R G B R G B R G B R G B G B R G B 479 R G B R G B R G B R G B G B R G B 480 R G B R G B R G B R G B G B R G B R : RED G : GREEN B : BLUE Display Corporation Module No. : MC75T01B Date: 2002.07.17 Ver.: 2 Page: 15 This specification is the property of Arima Display Corporation , any copy or reproduction without permission is prohibited. 9. QUALITY ASSURANCE 9.1 Appearance Inspection Appearance inspection should be done under the following condition. (1) In the dark room. The CFL should be lighted with the prescribed inverter. (2) The distance from eyes to LCD must be 30 cm. (3) Viewing direction must be within 30 degrees to vertical line of LCD center. EYE EYE °°30 30 LCD 9.2 Definition of A zone, B zone and C zone Active area Viewing area Window of Bezel A ZONE B ZONE C ZONE Display Corporation Module No. : MC75T01B Date: 2002.07.17 Ver.: 2 Page: 16 This specification is the property of Arima Display Corporation , any copy or reproduction without permission is prohibited. 9.3 Appearance Criterion Customer and supplier should hold a discussion when there is any problem about standard quality assurance or special quality assurance is needed. Inspection Standard: MIL-STD-105E normal inspection level II No. Item Criterion Zone AQL Line shape: Length Width Acceptable Q’ty L<4.0 W<0.03 Disregard W L<3.0 0.03Manufacture year 1: 2001 2: 2002 3: 2003 4: 2004 5: 2005 Manufacture month 1: Jan. 7: Jul. 2: Feb. 8: Aug. 3: Mar. 9: Sep. 4: Apr. A: Oct. 5: May. B: Nov. 6: Jun. C: Dec. Manufacture Day 01 ~ 31 Display Corporation Module No. : MC75T01B Date: 2002.07.17 Ver.: 2 Page: 20 This specification is the property of Arima Display Corporation , any copy or reproduction without permission is prohibited.
