模具设计指示-顶出系统

``ᑓࠠ๻ૠਐق ULTRATECH MOLD DESIGN INDICATION ᚾூ MDI001 A Ԯ΢ື󰀁 (Ejection System) ʳʳʳ1. 4ᲸΖ 󰀁2. Ζ (4. 5. )Ζ 󰀁Ζ 󰀁Ζ 󰀁6. 170˚F (77 ˚C) Ζ 󰀁7. 200mm300mmΖլ2ࣤᖄΖ 󰀁8. Ζ 󰀁9. Ζ 󰀁10. Օ1/32”(0.8mm)Ζ 󰀁11. Օ1/64”(0.4mm)Ζ 󰀁12. 13. 14. 0.002” (0.05mm)Ζ 󰀁45Ζ 󰀁(4ࣤ) Ζ׼15. () Ζ 󰀁 (support pillar) 0.02mmΖ 󰀁19. 2Ζ 󰀁20. 2 , 2 Ζ 󰀁21. Ζ 󰀁``ᑓࠠ๻ૠਐق ULTRATECH MOLD DESIGN INDICATION ᚾூ MDI001 A 7.1. ๻ૠࠏ՗ΰProven Designα 7.2. (Ejector Pin) a. , , Ζ Ζ b. D-2 HRC58-60 ,7.2.1-- ՕપѾˁѽ̀̀ ``ᑓࠠ๻ૠਐق ULTRATECH MOLD DESIGN INDICATION ᚾூ MDI001 A 7.2.2-- 7.2.3. -- ʳʳʳ``ᑓࠠ๻ૠਐق ULTRATECH MOLD DESIGN INDICATION ᚾூ MDI001 A 7.2.5. ``ᑓࠠ๻ૠਐق ULTRATECH MOLD DESIGN INDICATION ᚾூ MDI001 A , 7.2.6.ංථංࣨ 7.2.7.ʳʳ``ᑓࠠ๻ૠਐق ULTRATECH MOLD DESIGN INDICATION ᚾூ MDI001 A ˟˅ˁ˃̀̀ືಾ֞ ͫA L ʳʳʳʳʳʳʳʳʳʳ2 8 3 10 4 12 5 13 6 14 8 16 10 18 12 20 14 22 16 24 ``ᑓࠠ๻ૠਐق ULTRATECH MOLD DESIGN INDICATION ᚾூ MDI001 A ʳ (Ejector Sleeve)ʳʳʳʿ׹ʳʳ D P ``ᑓࠠ๻ૠਐق ULTRATECH MOLD DESIGN INDICATION ᚾூ MDI001 A 7.4. ʳʳංࣨ ``ᑓࠠ๻ૠਐق ULTRATECH MOLD DESIGN INDICATION ᚾூ MDI001 A b.ʳʳ˔ ``ᑓࠠ๻ૠਐق ULTRATECH MOLD DESIGN INDICATION ᚾூ MDI001 A 12 2.ʳංࣨ˄ ``ᑓࠠ๻ૠਐق ULTRATECH MOLD DESIGN INDICATION ᚾூ MDI001 A b.2.ංჇB. 1. 2/3D , 2/3D 2. 3. ං CORE Ø0.03ДØ 0.05. ` 7.5. ʳ 7.6. ڃືಾᇘࠫ`ᑓࠠ๻ૠਐق ᚾூ MDI001 ULTRATECH MOLD DESIGN INDICATION A ʳ``ᑓࠠ๻ૠਐق ULTRATECH MOLD DESIGN INDICATION ᚾூ MDI001 A ˄ˁʳʳʳ˖ʼʳ󰀁