Soft Shell
Pin and Socket ConnectorsUniversal MATE-N-LOK Connectors
Product Facts■Pins and sockets can be intermixed in the same housingPositive polarizationRear cavity identificationContacts completelyenclosed in housingsPositive locking housingsInsulation capability to .200[5.08] diameterRemovable, crimp snap-incontactsLow contact mating forceContacts accept 30-10 AWG [.05-5.0 mm2] wire sizesContacts available with pre-tin or gold platingDual locking lances provideoptimum contact stabilityPanel mount or free hangingMate with Universal MATE-N-LOK II HousingsAvailable in UL 94V-O flameretardant material. Meetsthe material requirements oftable 25.1 of U.L. Standard1410 (television receiversand video products)Not for interrupting currentHarness to PC Board capabil-ity using pin or socket headersPin and socket headers areavailable in both vertical andright-angle styleSolderability—headers meetMIL-STD 202 Method 208Contacts are on .250 [6.35]centerline spacingRecognized under theComponent Program of Underwriters LaboratoriesInc., File No. E28476R■■■■■■■■■■■■■Performance Characteristics
The Universal MATE-N-LOK Connectorperformance characteristics found onpages 163-164are based on free hang-ing and panel mount connectors, loaded with contacts crimped on stranded wire.Dielectric Withstanding Voltage—5.0 KVAC or 5.0 KVDC between adjacent circuits
Insulation Resistance—
1000 megohms minimum initial between adjacent circuits
Voltage Rating—600 V AC or DCContact Insertion Force—5.0 lb. max. per contact
Contact Retention—15 lb. min. per contact
Durability—50 cycles, mating and unmating
Technical Documents
Product Specifications
108-1031Universal MATE-N-LOK
Connectors
108-1053Universal MATE-N-LOK
PC Board HeadersApplication Specification
114-1010Universal MATE-N-LOK
ContactsInstruction Sheet
408-7714Plug, Cap, Headers, Pin,
Socket and Accessories
■■■Standard Density.250 [6.35]Centerline■■■■Certified by CanadianStandards Association,File No. LR 7189Passed test by VDE undertheir Registration Number3980/ContinuousSurveillanceR■163
Catalog 82181Revised 5-06
www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in bracketsare metric equivalents.
Dimensions are shown forreference purposes only.Specifications subject to change.
USA: 1-800-522-6752Canada: 1-905-470-4425Mexico: 52-55-1106-0800C. America: 57-1-254-4444
South America: 55-11-2103-6000Hong Kong: 852-2735-1628Japan: 81-44-844-8013UK:44-208-420-8341
元器件交易网www.cecb2b.com
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Connectors(Continued)
Performance
Characteristics (Continued)
Maximum Current—Maximum cur-rent rating of Universal MATE-N-LOKconnectors is limited by the maximumoperating temperature of the housingswhich is 125°C for 94V-2 housings and120°C for 94V-0 housings including thetemperature rise of the contacts which isa maximum of 30°C. There are severalvariables which have a direct effect onthis maximum current-carrying capabili-ty for a given connector and must beconsidered for each application. Thesevariables are:
Wire Size—Larger diameter wire willcarry more current since it has lessinternal resistance to current flow andthus generates less heat. Longer wirelengths also enhance current carryingcapabilities since the wire conducts heataway from the connector.
Connector Size—In general, the morecircuits in a connector, the less currentcan be carried.
Ambient Temperature—The higherthe ambient temperature, the less currentcan be carried in any given connector.Printed Wiring Board ConductorSize—The finished trace conductorwidth and thickness should be maxi-mized to allow for the greatest currentcarrying capacity and heat dissipation.
Current Rating Verification for 30°CMaximum Temperature Rise 100% EnergizedWire-to-Wire
Calculated Current Table
Number ofCircuits23456 In-Line6 Matrix89101215
1019.0017.5016.5016.0015.5015.0014.5013.5014.0012.5012.00
1218.0016.5015.5015.0014.5014.0014.0012.5013.0012.0011.50
1417.0015.5015.0014.0013.5013.0013.0011.5012.5011.0010.00
1614.5013.0012.5012.0011.5011.0010.509.5010.009.008.50
Wire Gauge182013.0010.0012.009.0011.008.5010.508.0010.008.009.507.509.507.508.506.509.007.008.006.007.506.00
22
8.007.507.006.506.506.006.005.505.505.004.50
246.506.005.505.505.005.005.004.504.504.004.00
265.505.004.504.504.004.004.003.503.503.003.00
303.503.003.003.002.502.502.502.002.502.002.00
Values are based on initial Temperature Rise versus Current Testing and are intended to be a guide in the selectionof a connector family. All applications should be tested by the end user. The values listed are per circuit for fully load-ed housings being 100% energized. Note:All combinations were not tested, and this chart contains interpolated andextrapolated values.
Minimum Wire Lengths for T-Rise vs. Current TestingAWG3028262420Min. Length (in.)2.63.24.15.17.8AWG1816141210Min. Length (in.)9.411.313.716.419.3Note: If wire lengths used are less than those listed above, the current carrying ability of the system will be reduced due to less heat beingconducted away from the connector. The customer should fully test all applications.
Universal MATE-N-LOK connectors alsowill withstand the following tests:Vibration—10-55-10 cycles perminute at .06 inch total excursionPhysical Shock—18 drops, 50 G sawtooth at 10 millisecondsHousing Panel Retention—75 lb. min.
Housing Lock Strength—30 lb. min.Thermal Shock— -55°C to +85°CTemperature-Humidity Cycling—25°C to 65°C at 95 RHCorrosion—48 hr. at 5% salt concentration
Wire-to-Board
Due to the vast differences in trace geometry and printed circuit board configurations, we are unable to provide a separate current carrying chart for our printed circuit board header products. However, the above Wire-to-Wire chartsmay be used as a guideline for headers if the trace width and thickness is equal to the listed wire gauge. For verticalheaders, only 95% of the Wire-to-Wire value should be used. For right-angle headers, only 75% of the Wire-to-Wirevalue should be used. The chart values are only a tool for connector selection and will require the customer to fullytest their application.
Termination Resistance/Contact Crimp Tensile Force
Wire SizeAWGmm23028262422201816141210
.05.08.12.2.3.5.81.22.03.05.0
TerminationResistanceTestResistanceCurrentMilliohms(Amps)(Max. Init.)———1.534.56810——
———3.503.503.003.002.752.75——
ContactCrimpTensile ForceForce (Min.)lbs.N29313627836146214623013345200502226026770311
Related Product Data
Product Specifications
108-1031Universal MATE-N-LOK
Connectors
108-1053Universal MATE-N-LOK
Headers
Note:This is the total resistance between wire crimps of a mated pin and socket.
164
Catalog 82181Revised 5-06
www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in bracketsare metric equivalents.
Dimensions are shown forreference purposes only.Specifications subject to change.
USA: 1-800-522-6752Canada: 1-905-470-4425Mexico: 52-55-1106-0800C. America: 57-1-254-4444
South America: 55-11-2103-6000Hong Kong: 852-2735-1628Japan: 81-44-844-8013UK:44-208-420-8341
元器件交易网www.cecb2b.com
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Connectors(Continued)
Universal MATE-N-LOK Connector Mating Combinations
Connector Part Number
Number
FlammabilityStyleof
RatingCircuits
UL94V-2UL94V-0
——
Plug
PartNumber21-350867-01-641084-03350865-1
CapPartNumber2770421-11-641083-03350866-1
Mating Connector Part Number
PC Board HeadersVertical Pin2Vertical Socket2StandardPlatingStandardStandardLongStandardTailTailTailTailTail
PolarizedPolarized—
—
——641963-1641963-3641964-11-641964-15641964-3641965-1—641966-11-641966-14
—641967-1—641968-1—643405-1—643406-1—643407-1—643408-1—641969-1—
——350582-1350582-4350787-1350787-3350583-1350583-4350790-1350790-3350584-1350584-4350793-1350793-3————————350585-1350585-4
——350759-4350759-5350824-1350824-4350760-4350760-5350825-1350825-4350761-4350761-5350826-1350826-4640467-1640467-3640901-1640901-3——770262-1770262-3350762-4350762-5
——643411-1—643412-1643412-3643413-1—643414-1643414-3643415-1—643416-1—————————643423-1—
Right-Angle2LongTail——350986-4—350831-1—350987-4—350832-1350832-4350988-4350988-5350833-1350833-4————————350989-4350989-5
Pin————1-350942-03-350942-0
——1-350943-03-350943-01-350948-0
—1-350944-03-350944-01-350949-0
—1-350945-03-350945-0640587-1—640583-1640583-3
——
Socket————643226-1———643228-13-643228-0
——643230-13-643230-0
——643232-13-643232-0
——643234-13-643234-0
——
1
1-480698-0
UL94V-2In-Line1-770113-03
2
UL94V-0In-Line
350777-1
——
1-480699-0Pre-tin350428-11-770114-03Duplex1350428-4350778-1
Pre-tin350786-1
1-480700-0
UL94V-2In-Line1-641771-03
3
UL94V-0In-Line
350766-1
Duplex1350786-3
1-480701-0Pre-tin350429-11-641767-03Duplex1350429-4350767-1
Pre-tin350789-1
350789-3350430-1350430-4350792-1350792-3640466-1640466-3640900-1640900-3641832-1641832-3641831-1641831-3
4
UL94V-2In-Line1-480702-0770208-13UL94V-0In-Line
350779-1
UL94V-2In-Line1-480763-0
5
UL94V-0In-LineUL94V-2In-LineUL94V-0In-Line
6
UL94V-2UL94V-0
350809-1640585-1640581-1
Duplex1
1-480703-0Pre-tin770209-13Duplex1
Pre-tin
350780-1
Duplex1Pre-tin
1-480764-0
Duplex1Pre-tin
350810-1
Duplex1Pre-tin
926307-1
Duplex1Pre-tin
926307-3
Duplex1
1-480704-0
Matrix1-641770-03
794096-15Matrix
350715-1
1-480705-0Pre-tin350431-11-641766-03Duplex1350431-4Pre-tinDuplex1Pre-tin
926308-1
Duplex1Pre-tin
926308-3
Duplex1
1-480707-0Pre-tin1-641765-03Duplex1350781-1
350711-1350711-4641825-1—641828-1—350432-1350432-4
641970-1350732-1350827-1643424-1350834-1——641970-3350732-4350827-4643424-3350834-4———770143-1—————
UL94V-2In-Line640586-1
———————
8
643410-1————640584-1643326-1
UL94V-0In-Line640582-1
643410-3————640584-33-643326-0641971-1350586-1350763-4643425-1350990-4——
UL94V-2Matrix1-480706-03
1-641769-0641971-3350586-4350763-5—350990-5——
9641972-1
Pre-tin350712-1350742-1350828-1643426-1350835-1——
UL94V-0Matrix350720-1350782-11-641972-14
Duplex1350712-4641972-3350742-4350828-4643426-3350835-4——Pre-tin————————
UL94V-2In-Line926302-1926309-11Duplex————————
10
Pre-tin————————
UL94V-0In-Line926302-3926309-3
Duplex1————————
—350991-4——1-480708-01-480709-0Pre-tin350433-1641973-1350587-1350764-4
UL94V-2Matrix1-641768-03641764-13Duplex1350433-4—350587-4350764-5—350991-5——
12641974-1
Pre-tin350713-1350737-1350829-1643428-1350836-1——
UL94V-0Matrix350735-1350783-11-641974-14
Duplex1350713-4641974-3350737-4350829-4—350836-4——Pre-tin350434-1641975-1350588-1350765-4643429-1350992-4——
UL94V-2Matrix1-480710-01-480711-0
Duplex1350434-4—350588-4350765-5————
15
Pre-tin350714-1641976-1350738-1350830-1643430-1350837-1——
UL94V-0Matrix350736-1350784-11Duplex350714-4641976-4350738-4350830-4—350837-4——
1Duplex Finish—Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050 [.00127] min. nickel underplate on entire contact.
2Universal MATE-N-LOK Plug and Cap housings accept pin or socket contacts. Use the appropriate contacts in the Plug housing as required by the mating component.
3Housing material has 125°C temperature rating. Lime green color. 12 Circuit cap black color.4Black in color.5Tool Removable
Note:All part numbers are RoHS Compliant.
Standard Density.250 [6.35]Centerline165
Catalog 82181Revised 5-06
www.tycoelectronics.comDimensions are in inches and millimeters unless otherwise specified. Values in bracketsare metric equivalents.Dimensions are shown forreference purposes only.Specifications subject to change.USA: 1-800-522-6752Canada: 1-905-470-4425Mexico: 52-55-1106-0800C. America: 57-1-254-4444South America: 55-11-2103-6000Hong Kong: 852-2735-1628Japan: 81-44-844-8013UK:44-208-420-8341
元器件交易网www.cecb2b.com
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Connectors(Continued)
ContactsSolid pin diameter .084 [2.13]Stock thickness .012 [.305] unless otherwise noted.These contacts can be used in eitherUniversal MATE-N-LOK Plug or Caphousings only.Related Product DataProduct Specification108-1031Universal MATE-N-LOKConnectorsApplication Specification114-1010Universal MATE-N-LOKContactsPerformance Characteristics—pages 163-164Technical Documents—pages 163 and199-200Application Tooling—pages 201-204Housings—page 168Solid PinSocketWire SizeRangeAWG [mm2]30-26[.05-.12]
Ins. Dia.Range.032-.057.813-1.45
L Dim.PinSocket.790.76020.0619.30
Contact Part NumbersMaterial & FinishBrass, Pre-tinPhos. Brz., Gold2Brass, Pre-tinBrass, Gold2Brass, Select Gold3Phos. Brz., Pre-tinPhos. Brz., Select Gold3
Brass, Pre-tinBrass, Gold2
Brass, Select Gold3Phos. Brz., Pre-tinPhos. Brz., Select Gold3
Brass, Pre-tinBrass, Gold2
Brass, Select Gold3Phos. Brz., Pre-tinPhos. Brz., Select Gold3
Brass, Pre-tinPhos. Brz., Pre-tinPhos. Brz., Pre-tinPhos. Brz., Select Gold
3
Pin
Strip Form350924-1350924-6350561-1350561-2350561-7350561-3
—350218-1350218-2350218-7350218-3350218-6350538-1350538-2350538-7350538-3350538-6350873-1350873-3350922-3350922-6
Loose Piece770672-1770672-6350690-1350690-2350690-7350690-3
—350547-1350547-2350547-7350547-3350547-6350552-1350552-2350552-7350552-3350552-6—350918-3640309-3640309-6
24-18[.2-.8].040-.1001.02-2.54.790.76020.0619.30
20-14[.5-2.0]
.060-.1301.52-3.30.790.76020.0619.30
20-14[.5-2.0]or2@18[.8]18-144[.8-2.0]12-10[3.0-5.0]
1
.130-.2003.30-5.08.810.78020.5719.81
Socket
Strip FormLoose Piece350925-1770673-1350925-6—350851-1
350689-11
350570-11350851-2640347-2
1350570-2350689-21
350851-7
350689-71
350570-71350570-31350689-31350570-61—350536-1350550-1350536-2350550-2350536-7350550-7350536-3350550-3350536-6350550-6350537-1350551-1350537-2350551-2350537-7350551-7350537-3350551-3350537-6350551-6350874-1350874-3350923-3350923-6
—350919-3640310-3640310-6
HDMApplicatorPart No.466616-26466616-36
Hand ToolPart No.58439-1
466320-16466320-26466320-46
91510-1
687763-16687763-26687763-66
91500-1
687926-16687926-26687926-66466588-16466588-26466588-36466597-16466597-26466597-36
91508-1791506-17
.130-.2003.30-5.08.200 max.5
5.08
.810.78020.5719.81.810.78020.5719.81
91508-1791506-1769710-17
Socket Contact—.010 [.254] stock thickness
Gold Finish—Plated with .000030 [.000762] min. gold in mating area and inside wire barrel over .000050 [.00127] min. nickel underplate on entire contact.3Select Gold Finish—Plated with .000030 [.000762] min. gold in mating area over .000050 [.00127] min. nickel underplate on entire contact.4Recommended for predominant use of 14 AWG wire.
5There is no insulation barrel on this contact. Insulation maximum diameter is limited by the housing.
6HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on AMP-O-LECTRIC Model K Machine,-3, -4 & -6 are used on AMP-O-LECTRIC Model G Machine. See pages 201-204for further information.
7Hand Tool No. 91508-1 is for wire size 20-18 AWG. Hand Tool No. 91506-1is for wire size 16-14 AWG. Hand Tool No. 69710-1use die set No. 58380-1for12 AWGand No. 58380-2for 10 AWG.
Note: Phosphor bronze material contacts should be used in high temperature/humidity cycling applications.Note:All part numbers are RoHS Compliant.
2
Contact Retention Test Tool
Part No. 1586700-1IS 408-10003Contact Extraction ToolPart No. 318851-1IS 408-4371
Contact Insertion Tool
(For inserting contacts applied
to small diameter wire)
Part No. 91002-1IS 408-7347
166
Catalog 82181Revised 5-06
www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in bracketsare metric equivalents.
Dimensions are shown forreference purposes only.Specifications subject to change.
USA: 1-800-522-6752Canada: 1-905-470-4425Mexico: 52-55-1106-0800C. America: 57-1-254-4444
South America: 55-11-2103-6000Hong Kong: 852-2735-1628Japan: 81-44-844-8013UK:44-208-420-8341
元器件交易网www.cecb2b.com
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Connectors(Continued)
Contacts
Split pin diameter .086 [2.18]Stock thickness .012 [.305]
These contacts can be used in eitherUniversal MATE-N-LOK Plug or Caphousings only.
Split Pins
Related Product Data
Product Specification
108-1031Universal MATE-N-LOK
ConnectorsApplication Specification
114-1010Universal MATE-N-LOK
ContactsPerformance Characteristics—pages 163-164
Technical Documents—pages 163and 199-200
Application Tooling—pages 201-204Housings—page 168
Wire Size RangeAWG [mm2]
24-18[.2-.8]20-14[.5-2.0]20-14[.5-2.0]or2@18 [.8]
1
Ins. Dia.Range.040-.1001.02-2.54.060-.1301.52-3.30.130-.2003.30-5.08
L Dim..79020.06.79020.06.81020.57
Material & FinishBrass, Pre-tinBrass, Gold1
Brass, Select Gold2
Brass, Pre-tinBrass, Gold1
Brass, Select Gold2
Brass, Pre-tinBrass, Gold1
Brass, Select Gold2
Contact Part NumberStrip Form350699-1350699-2350699-7350687-1350687-2350687-7350700-1350700-2350700-7
Loose Piece350706-1350706-2350706-7350705-1350705-2350705-7350707-1350707-2350707-7
HDMApplicatorPart No.466320-13466320-23466320-43687763-13687763-23687763-63687926-13687926-23687926-63
Hand ToolPart No.91510-1
91500-1
91508-1491506-14
Gold Finish—Plated with .000030 [.000762] min. gold in mating area and inside wire barrel over .000050 [.00127]min. nickel underplate on entire contact.
2Select Gold Finish—Plated with .000030 [.000762] min. gold in mating area over .000050 [.00127] min. nickel under-plate on entire contact.
3HDM Applicator part number ending in -1, is used on AMPOMATOR CLS Machine with T or G Terminators, -2 isused on AMP-O-LECTRIC Model K Machine, -4 & -6 are used on AMP-O-LECTRIC Model G Machine. See pages 201-204for further information.
4Hand Tool No. 91508-1 for wire size 20-18 AWG. Hand Tool No. 91506-1 for wire size 16-14 AWG.Notes:
1. Split pins recommended for use in housings having 6, 9, 12 and 15 circuits to reduce mating force.
2. Phosphor bronze material contacts are available for use in high temperature/humidity cycling applications, consult Tyco Electronics.
Grounding Pins
(.100 [2.54] longer than standard pin)
(Mate first, break last, not for interruptingcurrent)
Wire Size RangeAWG [mm2]
24-18[.2-.8]20-14[.5-2.0]12-10[3.0-5.0]
12
Ins. Dia.Range.060-.1301.52-3.30.060-.1301.52-3.30.200 max.1
5.08
L Dim..89022.60.89022.60.91023.11
Material & FinishBrass, Pre-tinBrass, Pre-tinPhos. Brz., Pre-tin
Contact Part NumberStrip Form770210-1350654-1770234-3
HDM
ApplicatorHand Tool
Part No.Loose PiecePart No.
567216-22
——567216-32
687763-12
350669-1687763-2291500-1
687763-62466597-12
——466597-22
466597-32
Standard Density.250 [6.35]CenterlineThere is no insulation barrel on this contact. Insulation maximum diameter is limited by the housing.
HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is usedon AMP-O-LECTRIC Model K Machine, -3 & -6 are used on AMP-O-LECTRIC Model G Machine. See pages 201-204for further information.
Programmable ConnectorContact
(Socket with 110 Series Special FASTON Tab)Material and FinishBrass, pre-tin
.805[20.45]
.048
[1.22]Dia.
Part Number350877-1
Note:This contact will accept a 110Series FASTONReceptacle—PartNo. 350871-1(strip form) allowingsimple field wiring or wiring changes.
Note:All part numbers are RoHS Compliant.
167
Catalog 82181Revised 5-06
www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in bracketsare metric equivalents.
Dimensions are shown forreference purposes only.Specifications subject to change.
USA: 1-800-522-6752Canada: 1-905-470-4425Mexico: 52-55-1106-0800C. America: 57-1-254-4444
South America: 55-11-2103-6000Hong Kong: 852-2735-1628Japan: 81-44-844-8013UK:44-208-420-8341
元器件交易网www.cecb2b.com
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Connectors(Continued)
Housings
Free Hanging or Panel Mount
.250 [6.35] Centerline spacing
.460[11.68]
.580[14.73]
.300[7.62]
2, 3, 4, 5, 6, 8 and 10Circuit, In-Line
.300[7.62]
Plug
1.080[27.43]
1.080[27.43]
.620[15.75]
Cap
1 Circuit, Free Hanging
.290[7.37]
.460[11.68]
6 Circuit, Matrix
.550[13.97]
1.080[27.43]
.550[13.97]
.290[7.37]
Plug
.380[9.65]
1.080[27.43]
Plug
1.080[27.43]
.460[11.68]
1.080[27.43]
Cap
.800[20.32]1.120[28.45]
1.080[27.43].380[9.65]
9, 12 and 15 Circuit,Matrix
Cap
.800[20.32]1.080[27.43]
.460[11.68]
1.080[27.43]
.800[20.32]
Plug
1.080[27.43]
Cap
1.120[28.45]
Related Product Data
Product Specification
108-1031 Universal MATE-N-LOK
ConnectorsPerformance Characteristics—pages 163-164
Contacts—pages 166-167Panel Cutout
Recommendations—page169Keying Plug—page 169
Strain Reliefs—pages 169-170Technical Documents—pages 163and 199-200
Mating Headers—pages 176-177and 179
Other Mating Connectors
Universal MATE-N-LOK II Housings—pages 187-188
Number ofCircuits
12345
ADim.—.55013.97.80020.321.05026.671.30033.021.55039.37—
Housing Part Numbers
UL94V-2 Nylon, Natural Color2UL94V-0 Nylon3PlugCapPlugCap1-350867-0770421-1350865-1350866-11-480698-011-480700-011-480702-011-480763-01
640585-111-480704-0794096-14
640586-111-480706-0926302-111-480708-01-480710-0
1-480699-011-480701-011-480703-011-480764-01
926307-111-480705-0926308-111-480707-0926309-111-480709-01-480711-0
350777-11350766-11350779-11350809-11640581-11350715-1640582-11350720-1926302-31350735-1350736-1
350778-11350767-11350780-11350810-11926307-31350781-1926308-31350782-1926309-31350783-1350784-1
6
89101215
12
2.05052.07.80020.322.55064.771.05026.671.30033.02
In-Line style.
Housing material has 125°C temperature rating.3Housing material has 120°C temperature rating.4Tool Removable.
Note:All part numbers are RoHS Compliant.
168
Catalog 82181Revised 5-06
www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in bracketsare metric equivalents.
Dimensions are shown forreference purposes only.Specifications subject to change.
USA: 1-800-522-6752Canada: 1-905-470-4425Mexico: 52-55-1106-0800C. America: 57-1-254-4444
South America: 55-11-2103-6000Hong Kong: 852-2735-1628Japan: 81-44-844-8013UK:44-208-420-8341
元器件交易网www.cecb2b.com
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Connectors(Continued)
Recommended Cap HousingPanel Cutouts
View is from cap entry sideRefer to Application Specification114-1010
Note 3.110[2.79].175[4.45]Note 5DStyleNumber ofCircuits234BIn-LineNote 2E.100[2.54]56810Note 4C.175[4.45]Note 56Matrix91215
A.56514.35.81520.701.06527.051.31533.401.56739.802.06752.502.56765.20.56514.35.81520.701.06527.051.31533.40B.3408.64.3408.64.3408.64.3408.64.1543.91.1543.91.1543.91.48012.19.48012.19.48012.19.48012.19DimensionsC.0952.41.0952.41.0952.41.0952.41.1894.80.1894.80.1894.80.2756.99.2756.99.2756.99.2756.99D.53013.46.53013.46.53013.46.53013.46.53113.49.53113.49.53013.461.03026.161.03026.161.03026.161.03026.16E.2506.35.2506.35.2506.35.2506.35.39410.0.39410.0.39410.0.2506.35.2506.35.3508.89.3508.89Notes:1. Recommended panel thickness—.030-.090 [.762-2.286]. Panel must be punched so that housing enters panel insame direction as the punch.2. Optional — Do not remove this material when keying cap housing to panel.3. Circuit #1 location when using panel keying with 6, 9, 12 and 15 circuit Matrix housings.4. Circuit #1 location when using panel keying with 2, 3, 4, 5, 6, 8 and 10 circuit In-Line housings.5. .175 [4.45] dimension is .125 [3.18] for 6, 8 and 10 circuit In-Line housings.Keying Plugs
IS 408-3320
.770[19.56]
Part Numbers
UL94V-2 Nylon material, natural color—1-640415-1
UL94V-0 Nylon material—1-640415-0
Note: Keying plug snaps into plug or cap housing
Plug HousingStrain Reliefs
IS 408-3320
2, 3, 4, 5, 6 and 8 Circuit, In-Line
2 Req’d/Assy.See NoteWire Bundle Dia.—.312
Max.[7.92]
.600[15.24]
2 Req’d/Assy.See Note
6, 9, 12 and 15 Circuit, Matrix
Wire Bundle Dia.—.500Max.[12.7]
Standard Density.250 [6.35]Centerline.600[15.24]
Related Product Data
Plug Housings—page 168
Technical Documents—pages 163and 199-200
1.375[34.93]
(2) #6x5⁄8 Lg Type BPan head sheetmetal screws (not supplied)
1.375[34.93]
(2) #6x5⁄8 Lg Type BPan head sheetmetal screws (not supplied)
.530[13.46]
.530[13.46]
Part Numbers
UL94V-2 Nylon material, natural color—1-350589-0
UL94V-0 Nylon material—350811-1Part Numbers
UL94V-2 Nylon material, natural color—1-350590-0
UL94V-0 Nylon material—350812-1
Note: Strain relief part number represents one half of a strain relief. Two strain reliefs required per housing.Note:All part numbers are RoHS Compliant.
169
Catalog 82181Revised 5-06
www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in bracketsare metric equivalents.
Dimensions are shown forreference purposes only.Specifications subject to change.
USA: 1-800-522-6752Canada: 1-905-470-4425Mexico: 52-55-1106-0800C. America: 57-1-254-4444
South America: 55-11-2103-6000Hong Kong: 852-2735-1628Japan: 81-44-844-8013UK:44-208-420-8341
元器件交易网www.cecb2b.com
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Connectors(Continued)
Plug or
Cap HousingStrain Reliefs
IS 408-3320Related Product Data
Housings—page 168
Technical Documents—pages 163and 199-200
AdapterNote 4
Enclosed StrainRelief
2 Req’d/Assy.Note 3
2, 3, 4, 5, 6, 8, 9,12 and 15 Circuit(Enclosed)
Cap Connector
2 Req’d/Assy.Note 3
(2) #6x5/8 Lg Type BPan head sheet metalscrews (not supplied)
2 Req’d/Assy.
Note 3
Cap Housing Adapters
These adapters are designed to anchorthe cap housing strain reliefs to thehousings and prevent the strain reliefhalves from “drawing in” when the
screws are being torqued down to clampthe cable.
1.300[33.02]
Note 2
1.300[33.02]
Note2
(2) #6x3/8 Lg Type BPan head sheet metalscrews (not supplied)
Note 1
IS 408-3320
For All Positions Except 2, 6and 8 Circuit Cap Housings
.630[16.0]
In-Line
Insert
Matrix
Style
Number ofCircuitsA Dim..96024.38
InsertSuppliedYesNoYesNoYesNoYesNoYesNoYesNoYesYesYesYes
Single WireDia. Range.040-.1901.02-4.83
—.040-.1901.02-4.83
—.040-.1901.02-4.83
—.040-.1901.02-4.83
—.040-.1901.02-4.83
—.040-.1901.02-4.83
—————
Wire BundleDia. Range
—.200-.3505.08-8.89
—.200-.3505.08-8.89
—.200-.3505.08-8.89
—.200-.3505.08-8.89
—.200-.3505.08-8.89
—.200-.3505.08-8.89.120-.6503.05-16.51.120-.6503.05-16.51.150-.7503.81-19.05.200-.8505.08-21.59
Part Numbers
UL94V-2 Nylon,
UL94V-0 Nylon
Natural Color1-640719-01-640719-11-640720-0641763-1641775-1641775-2643030-3643030-2643585-1643585-2——1-640721-01-640722-01-640723-01-640724-0
640713-1640713-2640714-1641945-1641776-1641776-2643030-1643030-4643313-1643313-2643314-1643314-2640715-1640716-1640717-1640718-1
2
.550 [13.97]
3
1.14028.96
4
UL94V-2 Nylon material, natural color—641777-1UL94V-0 Nylon material—641778-1
In-Line
1.32533.65
5
1.53038.86
For 2 In-Line and 6 MatrixCircuit Cap Housings Only
.630[16.0]
6Note 5
1.78045.21
8Note 56
2.28056.081.03026.161.03026.161.28032.511.53038.86
.480 [12.19]
9
Matrix
12
UL94V-2 Nylon material, natural color—643182-1UL94V-0 Nylon material—643182-2
15
Notes:
1. Cable clamping insert comes attached to strain relief. It can be used to provide additional adjustment for small wirebundles or discarded.
2. Insert to be positioned as shown by dotted lines.
3. Strain relief part number represents one-half of a strain relief. Two strain reliefs required per housing.
4. Must use cap housing adapters when attaching strain reliefs to a cap housing. Two adapters required per housing.5. Strain reliefs for 6 and 8 circuit In-Line fits plug housings only.Note:All part numbers are RoHS Compliant.
170
Catalog 82181Revised 5-06
www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in bracketsare metric equivalents.
Dimensions are shown forreference purposes only.Specifications subject to change.
USA: 1-800-522-6752Canada: 1-905-470-4425Mexico: 52-55-1106-0800C. America: 57-1-254-4444
South America: 55-11-2103-6000Hong Kong: 852-2735-1628Japan: 81-44-844-8013UK:44-208-420-8341
元器件交易网www.cecb2b.com
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Flanged Cap Housings with Twist and Lock Feature
Product Facts
■
Available in a 6, 9, and 12circuit design
■Designed for householdappliances where a
bulkhead connector systemis needed in conjunctionwith foam-in insulation■Mates with standard
Universal MATE-N-LOK plughousings (page 168)■Accepts Universal
MATE-N-LOK pin and socketcontacts (page 167)■Designed to utilize theSplash Proof/SealedUniversal MATE-N-LOKseals for additional sealingprotection (pages 174-175)
Dia.
Material and Finish
Housing—Nylon, UL 94V-0 or UL 94V-2 rated
Contacts—Phosphor Bronze or BrassDia.
Plating—Pre-tin or Gold
Related Product Data
Contacts—pages 166-167Recommended Panel Cutout(for 6 and 9 Pos. Housings)
Plug Housings—page 168.800Seals—page 174
[20.32]
Dia.
.675
[17.15] Radius2 Plc.
.550[13.97]
.510[12.95]
1.080[27.43]
Notes:
1. Recommended Panel Thickness:Number of Cap Housing Part Numbers0.76-2.29 [.030-.090]
Circuits
2. Panel must be punched so thatUL 94V-0UL 94V-2the housing enters the panel in6794760-1794714-1the same direction as the punch.3. Asymmetrical panel cutout pro-9794761-1794715-1vides polarization for Pin 1 loca-12
794762-1
794716-1
tion.
Note:All part numbers are RoHS Compliant.
171
Catalog 82181
Dimensions are in inches and Dimensions are shown forUSA: 1-800-522-6752South America: 55-11-2103-6000Revised 5-06
millimeters unless otherwise reference purposes only.Canada: 1-905-470-4425Hong Kong: 852-2735-1628specified. Values in bracketsSpecifications subject Mexico: 52-55-1106-0800Japan: 81-44-844-8013www.tycoelectronics.com
are metric equivalents.
to change.
C. America: 57-1-254-4444
UK:44-208-420-8341
.250 [6.35]CenterlineStandard Density元器件交易网www.cecb2b.com
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Sealed Bulkhead Connectors
Product Facts
Bulkhead mount UniversalMATE-N-LOK connector thatfacilitates sealed panelmounting and works withexisting Universal MATE-N-LOK seals to provide afully-sealed interconnectionsystem.
■Available in 4, 6, 9 and 12positions
■Sealed, flange mountdesign
■Mates to standard UniversalMATE-N-LOK plug housings■Accepts standard UniversalMATE-N-LOK contacts■Works with standardUniversal MATE-N-LOKconnector interface andwire seals
■Anti-rotation feature aidsinstallation
■Rear mount flange designenables use in wireharnesses
■Pins and sockets can beintermixed in the samehousing
■UL Recognized, File No. E28476■CSA Certified, File No. 1030930
■
RRPerformance Characteristics
Dielectric Withstanding Voltage—5.0 KVAC or 5.0 KVDC between adjacent circuits
Insulation Resistance—1000 megohms minimum initialbetween adjacent circuits
Voltage Rating—600 V AC or DCDurability—50 cycles, mating and unmating
Technical Documents
Product Specification
108-1031 Universal MATE-N-LOK
Connectors
Application Specification
114-1010 Universal MATE-N-LOK
Contacts
Instruction Sheet
408-10017 Universal MATE-N-LOK
Bulkhead Connectors
Applications
Vending Machines■Industrial Machinery■Lighting
■HVACEquipment
■
172
Catalog 82181Revised 5-06
www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in bracketsare metric equivalents.
Dimensions are shown forreference purposes only.Specifications subject to change.
USA: 1-800-522-6752Canada: 1-905-470-4425Mexico: 52-55-1106-0800C. America: 57-1-254-4444
South America: 55-11-2103-6000Hong Kong: 852-2735-1628Japan: 81-44-844-8013UK:44-208-420-8341
元器件交易网www.cecb2b.com
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Sealed Bulkhead Connectors(Continued)
Connector HousingsMaterial and Finish
Housing—Nylon, UL 94V-0 ratedContacts—Brass with pre-tin or goldplating
O-ring Seal—Neoprene
Locking Nut—Steel, zinc plated
4 Position Connector Housing(shown)
1.050[26.67]1.160[29.46].750[19.05].980[24.89].300[7.62]1.500[38.10]1.680[42.67]1.000[25.40]ÿ1.320 [33.53]1.480[37.59]Ø1.660 [42.16]Standard Density.250 [6.35]CenterlineRecommended
Panel Cut-Out for 4, 6 & 9 Position Product OnlyRecommended
Panel Cut-Out for 12 Position Product Only
No. of Pos.
46912StyleIn LineMatrixMatrixMatrixHousing Part Number
1604256-11604210-11604254-11604941-1
Note:All part numbers are RoHS Compliant.
173
Catalog 82181Revised 5-06
www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in bracketsare metric equivalents.
Dimensions are shown forreference purposes only.Specifications subject to change.
USA: 1-800-522-6752Canada: 1-905-470-4425Mexico: 52-55-1106-0800C. America: 57-1-254-4444
South America: 55-11-2103-6000Hong Kong: 852-2735-1628Japan: 81-44-844-8013UK:44-208-420-8341
元器件交易网www.cecb2b.com
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Sealed Connectors
Splash Proof Seals
Product Facts
■
Material
Silicone rubber, blue color
Technical Documents
Product Specification
108-1031-1Splash Proof Seal,
Universal MATE-N-LOKConnectors
Contacts—page 175Housings—page 168
Instruction Sheet
408-3392Universal MATE-N-LOK
Splash Proof Seals
Plug Housing
Economical splash proof/immersible sealed connec-tor system
No design changes to exist-ing Universal MATE-N-LOKproduct
Existing applications utiliz-ing Universal MATE-N-LOKconnectors can be upgradedto a splash proof systemUtilizes two wire seals andone interface sealWire range is 20-14 AWG[.5-2.0] with insulation diameter range .060-.130[1.52-3.30]
.110-.130 [2.79-3.30] insulation diameter passedEuropean IP sealing level5/6 + 7 (swirling dust/immer-sion to 1 meter for 30 min-utes)
.060-.110 [1.52-2.79] insulation diameter passedEuropean IP sealing level 5/5 + 7 (swirling dust/heavyseas)
Universal MATE-N-LOKIIkeying plug can be used toseal unused circuitsPrimary application is forwire-to-wire; wire-to-boardapplication must use aclosed bottom header
Note: For proper use of this product, customer should make sure
that Instruction Sheet 408-3392 is available for review.
■
■
MatingEnd
Wire Seal
■■
ContactCavity
Cap Housing
■
Wire Seal
Pin Contact
Silos
Back Side(Wire End)
InterfaceSeal
■
Sealing Plug
Part Number 770377–1
■
■
Number ofCircuits234691215ADim.550.8001.050—.8001.0501.300Interface SealPart Number794269-1794271-1794273-1794275-1794277-1794279-1794281-1Wire SealPart Number794270-1794272-1794274-1794276-1794278-1794280-1794282-1
Note:One interface seal and two wire seals required per matedassembly.
Note:All part numbers are RoHS Compliant.
2, 3, 4 Circuit, In-Line6 Circuit, Matrix
.800[20.32]9, 12, and 15 Circuit, Matrix
.800[20.32]A.300[7.62].300[7.62].800[20.32].550[13.97].550[13.97]AAA.400[10.16].030[.762].400[10.16].030[.762].800[20.32].400[10.16].030[.762]wireinterfacewireinterfacewireinterface
174
Catalog 82181Revised 5-06
www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in bracketsare metric equivalents.
Dimensions are shown forreference purposes only.Specifications subject to change.
USA: 1-800-522-6752Canada: 1-905-470-4425Mexico: 52-55-1106-0800C. America: 57-1-254-4444
South America: 55-11-2103-6000Hong Kong: 852-2735-1628Japan: 81-44-844-8013UK:44-208-420-8341
元器件交易网www.cecb2b.com
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Sealed Connectors(Continued)
Contacts (used with Splash Proof Seals)Solid pin diameter .084 [2.13]Split pin diameter .086 [2.18]Stock thickness .012 [.305] unless otherwise noted.These contacts can be used in eitherUniversal MATE-N-LOK Plug or Caphousings only.Solid PinSplit PinSocketRelated Product DataProduct Specification108-1031Universal MATE-N-LOKConnectorsApplication Specification114-1010Universal MATE-N-LOKContactsPerformance Characteristics—pages 163-164Technical Documents—pages 163and 199-200Application Tooling—pages 201-204Housings—page168Wire Size
Ins. Dia.Range2AWG [mm]Range
L Dim.
PinSocket
Material & Finish
Style
Grounding Pin(.100 [2.54] longer than standard pin)(Mate first, break last, not for interruptingcurrent)20-14[.5-2.0].060-.1301.52-3.30
.79020.06
Brass, Pre-tinBrass, Gold1
Brass, Select Gold2Phos. Brz., Pre-tin.760
19.30Phos. Brz., Select Gold2
Brass, Pre-tinBrass, Gold1
Brass, Select Gold2—
Brass, Pre-Tin
Solid
SplitGrounding
Contact Part NumbersHDM
ApplicatorHand ToolPinSocket
Part No.Part No.
Strip FormLoose PieceStrip FormLoose Piece 350218-1350547-1350536-1350550-1350218-2350547-2350536-2350550-2350218-7350547-7350536-7350550-7350218-3350547-3350536-3350550-3
687763-13
350218-6350547-6350536-6350550-6687763-2391500-1350687-1350705-1——687763-63350687-2350705-2——350687-7350705-7——350654-1
350669-1
.890
22.60
12
Gold Finish—Plated with .000030 [.000762] min. gold in mating area and inside wire barrel over .000050 [.00127] min. nickel underplate on entire contact.Select Gold Finish—Plated with .000030 [.000762] min. gold in mating area over .000050 [.00127] min. nickel underplate on entire contact.
3HDM Applicator part number ending in -1, is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on AMP-O-LECTRIC Model K Machine,-4 & -6 are used on AMP-O-LECTRIC Model G Machine. See pages 201-204for further information.Notes:
1. Split pins recommended for use in housings having 6, 9, 12 and 15 circuits to reduce mating force.
2. Phosphor bronze material contacts are available for use in high temperature/humidity cycling applications, consult Tyco Electronics.
3. 18-24 AWG contacts (page 166) can be used with splash proof seals if insulation diameter range is .060-.100 [1.52-2.54].
Standard Density.250 [6.35]CenterlineUniversal MATE-N-LOK IIKeying Plug/Splash ProofSealing Plug
IS 408-3392Related Product Data
Housings—page 168
Technical Documents—pages 163and 199-200
.130[3.30]
.940[23.88]
Part Number
UL94V-0 Nylon material—770377-1
Seal Latch ToolPart No. 794381-1IS 408-3392
Note:All part numbers are RoHS Compliant.
Contact Extraction ToolPart No. 318851-1IS 408-4371
Contact Insertion Tool (For insertingcontacts applied to small diameter wire)
Part No. 91002-1IS 408-7347
175
Catalog 82181Revised 5-06
www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in bracketsare metric equivalents.
Dimensions are shown forreference purposes only.Specifications subject to change.
USA: 1-800-522-6752Canada: 1-905-470-4425Mexico: 52-55-1106-0800C. America: 57-1-254-4444
South America: 55-11-2103-6000Hong Kong: 852-2735-1628Japan: 81-44-844-8013UK:44-208-420-8341
元器件交易网www.cecb2b.com
Soft Shell
Pin and Socket ConnectorsUniversal MATE-N-LOK Connectors
PCBoard VerticalPin Headers
.250 [6.35] Centerline spacing
2, 3, 4, 5, 6 and 8Circuit, In-Line
Polarizingfeature
Material
Housing—
UL94V-2 Nylon, natural color UL94V-0 Nylon
Contacts—Phosphor bronzeSolder tail diameter .062 [1.57]
.175 Standard Tail[4.45]
.235 Long Tail[5.97]
.550[13.97]
.300[7.62]
Number ofCircuitsADim.FlammabilityPinRatingFinishUL94V-2
Pre-tin
Duplex1Pre-tin
1
Pin Header Part NumbersStandardTail2350428-1350428-4350786-1350786-3350429-1350429-4350789-1350789-3350430-1770351-15350430-4350792-1350792-3640466-1640466-3640900-1640900-3641832-1641831-1641825-1641828-1
—
Standard TailPolarized2641963-1641963-3641964-11-641964-14641964-3641965-1—641966-11-641966-14
—641967-1——641968-1—643405-1—643406-1—643407-1643408-1—643410-1643410-3
Long Tail3350582-1350582-4350787-1350787-3350583-1350583-4350790-1350790-3350584-1
—350584-4350793-1350793-3
——————770143-1770272-1770272-3
Mates with PlugHousing Part Number(Using Socket Contacts)Universal UniversalMATE-N-LOKMATE-N-LOK II1-480698-0
—
Related Product Data
Product Specification
108-1053 Universal MATE-N-LOK
PC Board HeadersPerformance Characteristics—pages 163-164
Recommended PCBoard Hole Layout—page 178
Technical Documents—pages 163and 199-200
2
.55013.97
UL94V-0350777-1770017-1
3
.80020.32
DuplexPre-tin
UL94V-2
Duplex1UL94V-0
Pre-tinDuplexPre-tinPre-tinDuplex1Pre-tinDuplex1Pre-tinDuplex1Pre-tinDuplex1Pre-tinPre-tinPre-tinPre-tinDuplex1
1
1-480700-0—
350766-1770018-1
4
1.05026.67
UL94V-21-480702-0—
Mating Connectors
Universal MATE-N-LOKPlug Housings—page 168Universal MATE-N-LOK IIPlug Housings—pages187-188
65
1.30033.021.55039.372.05052.07
UL94V-0UL94V-2UL94V-0UL94V-2UL94V-0UL94V-2UL94V-0UL94V-0
350779-11-480763-0350809-1640585-1640581-1640586-1640582-1—
770019-1
—770016-1
—————
8
6, 9, 12 and 15Circuit, Matrix
Polarizingfeature
Number ofCircuitsADim.FlammabilityPinRatingFinish
Pre-tinDuplex
UL94V-0
1
Pin Header Part NumbersStandard
Tail2350431-1350431-4350711-1350711-4350432-1350432-4350712-1350712-4350433-1350433-4350713-1350713-4350434-1350434-4350714-1350714-4
Standard TailPolarized2641969-1——641970-11-641970-14641970-3641971-1641971-3641972-11-641972-14641972-3641973-1—641974-11-641974-14641974-3641975-1—641976-1641976-4
Long Tail3350585-1643749-15350585-4350732-1350732-4350586-1350586-4350742-1350742-4350587-1350587-4350737-1350737-4350588-1350588-4350738-1350738-4
Mates with PlugHousing Part Number(Using Socket Contacts)Universal UniversalMATE-N-LOKMATE-N-LOK II1-480704-0
—
UL94V-2
6
.55013.97
Pre-tin
1
.175 Standard Tail[4.45]
.235 Long Tail[5.97]
350715-1770020-1
.550[13.97]
9
.80020.32
DuplexPre-tin
UL94V-2
Duplex1UL94V-0
Pre-tin
1
1-480706-0—
350720-1770021-1
.800[20.32]
12
1.05026.67
DuplexPre-tin
UL94V-2
Duplex1UL94V-0
Pre-tin
1-480708-0—
350735-1770022-1
15
1.30033.02
Duplex1Pre-tin
UL94V-2
Duplex1Pre-tin
UL94V-0
Duplex1
1-480710-0350736-1
—770023-1
Duplex Finish—Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050[.00127] min. nickel underplate on entire contact.2Use Standard Tail for .062 [1.57] thick PC Board.3Use Long Tail for .125 [3.18] thick PCBoard.4Black in color.5No drain holes, used w/ seals, page 174.Note:All part numbers are RoHS Compliant.
1
176
Catalog 82181
Revised 5-06
www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in bracketsare metric equivalents.
Dimensions are shown forreference purposes only.Specifications subject to change.
USA: 1-800-522-6752Canada: 1-905-470-4425Mexico: 52-55-1106-0800C. America: 57-1-254-4444
South America: 55-11-2103-6000Hong Kong: 852-2735-1628Japan: 81-44-844-8013UK:44-208-420-8341
元器件交易网www.cecb2b.com
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Connectors(Continued)
PCBoard VerticalSocket Headers
.250 [6.35] Centerline spacing
2, 3, 4, 5, and 6 Circuit, In-Line
Polarizingfeature
Material
Housing—
UL94V-2 Nylon, natural color UL94V-0 NylonContacts—Phosphor bronzeSolder tail diameter .062 [1.57]
Number ofCircuits
ADim.
.175 Standard Tail[4.45]
.235 Long Tail[5.97]
.550[13.97]
.300[7.62]
FlammabilityRatingUL94V-2UL94V-0UL94V-2UL94V-0UL94V-2UL94V-0UL94V-2UL94V-0UL94V-0
SocketFinishPre-tinDuplex1Pre-tinDuplex1Pre-tinDuplex1Pre-tinDuplex1Pre-tinDuplex1Pre-tinDuplex1Pre-tinPre-tinPre-tinDuplex1Duplex1
Socket Header Part NumbersStandardTail2350759-4350759-5350824-1350824-4350760-4350760-5350825-1350825-4350761-4350761-5350826-1350826-4640467-1640467-3640901-1640901-3770262-3
Standard TailPolarized2643411-1
—643412-1643412-3643413-1
—643414-1643414-3643415-1
—643416-1
—————
—
Long Tail3350986-4
—350831-1
—350987-4
—350832-1350832-4350988-4350988-5350833-1350833-4
————
—
Mates with PlugHousing Part Number(Using Pin Contacts)Universal UniversalMATE-N-LOKMATE-N-LOK II1-480698-0350777-11-480700-0350766-11-480702-0350779-11-480763-0350809-1640581-1
—770017-1
—770018-1
—770019-1
—770016-1
—
Related Product Data
Product Specification
108-1053 Universal MATE-N-LOK
PC Board HeadersPerformance Characteristics—pages 163-164
Recommended PCBoard Hole Layout—page 178
Technical Documents—pages 163and 199-200
2
.55013.97
3
.80020.32
4
1.05026.67
Mating Connectors
Universal MATE-N-LOKPlug Housings—page 168Universal MATE-N-LOK IIPlug Housings—pages187-188
5
1.30033.021.55039.37
6
6, 9, 12 and 15 Circuit, Matrix
Polarizingfeature
.175 Standard Tail[4.45]
.235 Long Tail[5.97]
.550[13.97]
.800[20.32]
Number ofCircuitsADim.FlammabilityRatingUL94V-2UL94V-0UL94V-2UL94V-0UL94V-2UL94V-0UL94V-2UL94V-0
SocketFinishPre-tinDuplex1Pre-tinDuplex1Pre-tinDuplex1Pre-tinDuplex1Pre-tinDuplex1Pre-tinDuplex1Pre-tinDuplex1Pre-tinDuplex1
Socket Header Part NumbersStandardTail2350762-4350762-5350827-1350827-4350763-4350763-5350828-1350828-4350764-4350764-5350829-1350829-4350765-4350765-5350830-1350830-4
Standard TailPolarized2643423-1
—643424-1643424-3643425-1
—643426-1643426-3
——643428-1
—643429-1
—643430-1
—
Long Tail3350989-4350989-5350834-1350834-4350990-4350990-5350835-1350835-4350991-4350991-5350836-1350836-4350992-4
—350837-1350837-4
Mates with PlugHousing Part Number(Using Pin Contacts)Universal UniversalMATE-N-LOKMATE-N-LOK II1-480704-0350715-11-480706-0350720-11-480708-0350735-11-480710-0350736-1
—770020-1
—770021-1
—770022-1
—770023-1
Standard Density.250 [6.35]Centerline6
.55013.97
9
.80020.32
12
1.05026.67
15
1.30033.02
Duplex Finish—Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050[.00127] min. nickel underplate on entire contact.2Use Standard Tail for .062 [1.57] thick PCBoard.3Use Long Tail for .125 [3.18] thick PCBoard.
1
Note:All part numbers are RoHS Compliant.
177
Catalog 82181Revised 5-06
www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in bracketsare metric equivalents.
Dimensions are shown forreference purposes only.Specifications subject to change.
USA: 1-800-522-6752Canada: 1-905-470-4425Mexico: 52-55-1106-0800C. America: 57-1-254-4444
South America: 55-11-2103-6000Hong Kong: 852-2735-1628Japan: 81-44-844-8013UK:44-208-420-8341
元器件交易网www.cecb2b.com
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Connectors(Continued)
RecommendedPC BoardHole Layouts
for Pin and SocketVertical Headers
Related Product Data
Vertical Headers—pages 176-177
2, 3, 4, 5, 6 and 8Circuit, In-Line
.175[4.45]Polarizing HoleSee NoteNo. 1 Position2 Circuit3 Circuit4 Circuit5 Circuit6 Circuit8 Circuit.250Typ.[6.35].070Dia. Typ.[1.78]6, 9, 12 and 15Circuit, Matrix
.250Typ.[6.35].250Typ.[6.35]Polarizing HoleSee Note.175[4.45]No. 2 CircuitNo. 1 Circuit.070Dia. Typ.[1.78].250Typ.[6.35]Polarizing HoleSee Note.175[4.45]No. 2 Circuit.250Typ.[6.35]No. 1 Circuit.070Dia. Typ.[1.78].250Typ.[6.35].175[4.45]Polarizing HoleSee Note.250Typ.[6.35].175[4.45]Polarizing HoleSee Note.250Typ.[6.35]No. 2 Circuit.070Dia. Typ.[1.78]No. 1 Circuit.250Typ.[6.35]No. 2 CircuitNo. 1 Circuit.070Dia. Typ.[1.78]Note:Polarizing hole .070 [1.78] Dia. required for polarized headers only.
PC Board VerticalPin Headers withACTION PINContacts
Material and Finish
Housing—PBT, black
Flammability Rating—UL94V-0Contacts—Copper alloy, plated withtin over nickel on entire contact
.250[6.35]A.299[7.59].200± .004Typ.± 0.10[5.08 ].630Max.[16.00]Related Product Data
Performance Characteristics—pages 163-164
Technical Documents—pages 163and 199-200
Product Specification
108-5222 ACTION PINUniversal
MATE-N-LOK HeaderAssembly
Number of Circuits
234
A Dim.Part Number.75019.051.00025.401.25031.75
173924-1173925-1173926-1
Mates with Plug Housing
Part Number (Using Socket Contacts)Universal UniversalMATE-N-LOKMATE-N-LOK II1-480698-0
770017-1350777-1
1-480700-0
770018-1350766-1
1-480702-0
770019-1350779-1
Note: Install in PC Board with arbor tool.
Note:All part numbers are RoHS Compliant.
.062Ref.[1.57]Mating Connectors
Universal MATE-N-LOKPlug Housings—page 168Universal MATE-N-LOK IIPlug Housings—pages187-188
.100± .004± 0.10[2.54 ]4 Circuit3 Circuit2 CircuitDia. AfterReflow.032± .002± 0.05[0.81 ].200± .004± 0.10[5.08 ].038± .001± 0.03 [0.97 ].001-.003[0.03-0.08].0003-.0012[0.01-0.03]Recommended PC Board Hole LayoutPC Board Hole Dimensions178
Catalog 82181Revised 5-06
www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in bracketsare metric equivalents.
Dimensions are shown forreference purposes only.Specifications subject to change.
USA: 1-800-522-6752Canada: 1-905-470-4425Mexico: 52-55-1106-0800C. America: 57-1-254-4444
South America: 55-11-2103-6000Hong Kong: 852-2735-1628Japan: 81-44-844-8013UK:44-208-420-8341
元器件交易网www.cecb2b.com
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Connectors(Continued)
PC Board Right-AnglePin and Socket Headers
.250 [6.35] Centerline spacing
2, 3, 4, 5, 6 and 8 Circuit, In-line
.505[12.83]
.680[17.27]
.250[6.35]Typ.
.100[2.54]
.060Dia. Typ.[1.52]
.150
Dia.[3.81]2 Places
Material
Housing—Nylon
Contacts—Phosphor bronzeSolder tail width .052 [1.32]
.250
Typ.[6.35]
No. 1 Circuit
.290[7.37]
Related Product Data
Product Specification
108-1053 Universal MATE-N-LOK
PCBoard HeadersPerformance Characteristics—pages 163-164
Technical Documents—pages 163and 199-200
.160[4.06]
.360[9.14]
Use 6-32 UNC Pan Head Screw3/8 [9.53] long for mounting
(Not Supplied)Recommended PC Board Hole Layout
.062 [1.57] Board Thickness
No. ofCircuits
DimensionsA
B
C
ContactFinish
UL94V-2
Pin
Right-Angle Header Part Numbers
UL94V-0
Pin1-350942-0770994-123-350942-01-350943-03-350943-01-350944-03-350944-01-350945-03-350945-0640583-1640583-3640584-1640584-3
Mates withUniversalUniversalMATE-N-LOKMATE-N-LOK II643226-1—350777-1770017-1—643228-1
350766-1770018-1
3-643228-0643230-1
350779-1770019-1
3-643230-0643232-1
350809-1770016-1
3-643232-0643234-1
640581-1—
3-643234-0643236-1
640582-1—
3-643236-0Socket
SocketMates with
Mating Connectors
Universal MATE-N-LOKPlug Housings—page 168Universal MATE-N-LOK IIPlug Housings—pages187-188
2
.55013.97.80020.321.05026.671.30033.021.55039.372.05052.07
34568
———1.245.830Pre-tin
31.6221.08
Duplex1———
——1.4951.080Pre-tin
—
37.9727.43Duplex1——
—1.7451.330Pre-tin1-350948-0
1-480702-0
44.3233.78Duplex1——
—1.9951.580Pre-tin1-350949-0
1-480763-0
50.6740.13Duplex1——
2.2451.830Pre-tin640587-1643235-1640585-157.0246.48Duplex1—
—2.7452.330Pre-tin
643237-1640586-1
69.7259.18Duplex1—
Test Connectors
(with spring loaded contacts)
Material
Housing—Nylon
Flammability Rating—UL94V-0
1
Duplex Finish—Plated with .000030 [.000762] min. gold in mating area, matte tin on solder tail end over .000050
2Black in color.[.00127] min. nickel underplate on entire contact.
2, 3, 4 and 5 Circuit,
In-Line
PlugCap
Related Product Data
Mating Connectors—Housings andheaders having the same number of circuits. The housings can have pin orsocket contacts, or a combination of both.
Mating Housings—page 168Mating Headers—pages 176-179Other Mating Connectors
Universal MATE-N-LOK II Housings—pages 187-188
6, 9, 12 and 15 Circuit,Matrix
Standard Density.250 [6.35]Centerline.084 [2.13] Dia. PinMates withUniversalMATE-N-LOKSockets
Plug
Number ofCircuits
2345691215
Note:All part numbers are RoHS Compliant.
Part Numbers
Plug350848-2350848-3350848-4350848-5350848-6350848-91-350848-21-350848-5
Cap350849-2350849-3350849-4350849-5350849-6350849-91-350849-21-350849-5
Cap
Notes:
1. Test probes have 5 amp maxi-mum current rating. 1,000,000 cycles.
2. Test Connector housings are ofthe same configuration as stan-dard housings. Refer to page 23for dimensional specifications.
179
USA: 1-800-522-6752Canada: 1-905-470-4425Mexico: 52-55-1106-0800C. America: 57-1-254-4444
South America: 55-11-2103-6000Hong Kong: 852-2735-1628Japan: 81-44-844-8013UK:44-208-420-8341
Catalog 82181Revised 5-06
www.tycoelectronics.comDimensions are in inches and millimeters unless otherwise specified. Values in bracketsare metric equivalents.Dimensions are shown forreference purposes only.Specifications subject to change.
元器件交易网www.cecb2b.com
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Circular Connectors
Product Facts
Unique product designed toaccommodate the specificneeds of the lightingindustry
■Circular design allows theconnector to pass through7/8 inch knock-out holes inelectrical fixtures and boxes ■6-position accommodatesmost major electricalindustry requirements■Universal MATE-N-LOKconnector centerline
spacing maintains UL andCSA approvals
■Uses standard UniversalMATE-N-LOK contacts andapplication tooling
■Positive polarized housinghelps prevent incorrectmating
■UL Recognized, File No. E28476■CSA Certified, File No. LR7189
■
RRPerformance Characteristics
Voltage—600 V AC or DC
Current—20 amps maximum perUL-1977 (6 position, fully ener-gized)
Dielectric Withstanding Voltage—5 KVAC or KVDC
Insulation Resistance—1000 MΩmax. between adjacent circuitsDurability—50 cycles mating andunmating
Contact Retention—
15 lb. minimum per contact
Technical Documents
Product Specification
108-2069 Universal MATE-N-LOK
Circular Connector
Application Specification
114-1010 Universal MATE-N-LOK
Connectors
Applications
Primary applications are inthe Lighting, Vending, andAppliance industries
■Applications where use of acompleted harness that willpass through a 7/8 inchknock-out is required■Provides the capability toquickly disconnectindividual fixtures fromsensitive environmentalareas and perform
maintenance at other sites■Not for interrupting current
■
180
Catalog 82181Revised 5-06
www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in bracketsare metric equivalents.
Dimensions are shown forreference purposes only.Specifications subject to change.
USA: 1-800-522-6752Canada: 1-905-470-4425Mexico: 52-55-1106-0800C. America: 57-1-254-4444
South America: 55-11-2103-6000Hong Kong: 852-2735-1628Japan: 81-44-844-8013UK:44-208-420-8341
元器件交易网www.cecb2b.com
Soft Shell
Pin and Socket Connectors
Universal MATE-N-LOK Circular Connectors(Continued)
Plug
Part No. 794911-1
45˚2 Plc.
1.080[27.43]
.460[11.68]
.820[20.83] Ref.
.810[20.57] Ref.
Cap
45˚Part No. 794912-1
2 Plc.
1.080[27.43]
.820[20.83]
.810[20.57]
Material and Finish
Housings—Nylon, UL 94V-2 rated
Related Product Data
Contacts—pages 166-167
Note:All part numbers are RoHS Compliant.
181
Catalog 82181Dimensions are in inches and Dimensions are shown forUSA: 1-800-522-6752South America: 55-11-2103-6000Revised 5-06
millimeters unless otherwise reference purposes only.Canada: 1-905-470-4425Hong Kong: 852-2735-1628specified. Values in bracketsSpecifications subject Mexico: 52-55-1106-0800Japan: 81-44-844-8013www.tycoelectronics.com
are metric equivalents.
to change.
C. America: 57-1-254-4444
UK:44-208-420-8341
.250 [6.35]CenterlineStandard Density元器件交易网www.cecb2b.com
Soft Shell
Pin and Socket ConnectorsEngineering Notes
182
Catalog 82181Revised 5-06
www.tycoelectronics.com
Dimensions are in inches and millimeters unless otherwise specified. Values in bracketsare metric equivalents.
Dimensions are shown forreference purposes only.Specifications subject to change.
USA: 1-800-522-6752Canada: 1-905-470-4425Mexico: 52-55-1106-0800C. America: 57-1-254-4444
South America: 55-11-2103-6000Hong Kong: 852-2735-1628Japan: 81-44-844-8013UK:44-208-420-8341
因篇幅问题不能全部显示，请点此查看更多更全内容