CATIA环境变量说明及改变

CATNoStartDocument=no

#启动时不加载CATProduct 工作台； CNEXTBACKGROUND = no

#不显示背景天空图片，如果要更换为自己的背景就替换如下文件： ..\\intel_a\\resources\\graphic\\icons\\ClientMDIBackgroundNT.bmp CNEXTSPLASHSCREEN = no

#不显示启动行星动画,如果你想更换为自己的LOGO可替换如下文件即可！ 。。。。。。。\\intel_a\\resources\\graphic\\splashscreens\\CATIASplash.bmp CNEXTOUTPUT = console

#显示命令窗口，如果不需要出现DOS窗口可设 CNEXTOUTPUT=no

=================================================================================== CATLM_ODTS=1

#启动时禁止license 错误信息 L_WILSON_LAN=1 #使用 Wilson's spline 曲线 CGM_ROLLINGOFFSET=1 #使用旋转偏移选项（GSD） TAILLE_MEMOIRE_CHOISIE=1 #优化IGES输出 内存 SHOW_CST_CHILDREN = 1

#Display stresses in the parents specification tree in sketcher MM_NO_REPLACE = 1

#Associativty about replacement of components cloned with different IRD_PRODUCTTOPART = 1

#把 product转为PART的工具，要使用此命令，到装配设计工作台----tools--- Convert Product To Catpart

================================================================================

V4/V5移植变数：

KEEP_HIDDEN_ELEMENT=1 #No Show Elements are migrated cleanV4Topology=1

#It cleans topology automatically CATMigrSolidMUV4AsPart=1

#By Pasting \"As_SPEC\" It migrates SolidM into CATPart REPORT_BREP_INFO=1 #It makes migration report V5V4SaveAsVolume=1 #It migrates *SOL to *VOL V5V4CleanTolerance=0.01

#maximum gap used by automatic topology cleaner V5V4MaxSimplif=1

#It tries to concatenate small surfaces with large adjacent surfaces